Extremely Active Member
Group: Moderators
Posts: 313
Member No.: 5004
Joined: 11-May 07
|
I know this is almost as old as the dinosaurs, but I would like to write a 32 bit version to shred files like the 16 bit version below.
Probably not as many steps ?
Anyone interested ?
Thanks.
Code: [Select]
I would like to fix the file renaming function if it's possible.
Thanks.
| CODE |
; SHRED.ASM Ver 1i B/W version Tasm code format
; 16 bit code
;
; Much help from Stealth, Raymond, Bitrake, Rudy Weiser, Frank Kotler,
; Fauzan Mirza, Robert Redelmeier, QvasiModo,
;
; � Copywrong Andy 1996 - 2013
; Tasm code
;
;
Tuesday, January 22, 2013
; Works under Windows 7 Professional Service Pack 1 using Run, cmd.exe
;
; FILENAME CHANGE IS NOT CURRENTLY WORKING
;
;
; ***** FILE is NOT recoverable !!!! ****
;
; Supports Long Filenames
; Works in Win XP in a DOS box, with short or long filenames
;
; Shreds a 331 Meg file in 80 secs on an AMD K-6 475 MHz
;
; Overwrite a file with zero bytes, truncates it to zero bytes,
; set file time and date to 12:59:58 pm 1/1/80,
; renames it and then deletes it.
; Single files only. (For Safety)
;
; Use SHORT (8.3) FILENAME when file is a LFN
; Ex. C:\PROGRA~1\VERYLO~1.ASM
;
; Works across drives, handles periods in the path names
;
; Help from Stealth, Raymond, Bitrake, Rudy Weiser, Frank Kotler,
; Fauzan Mirza, Robert Redelmeier, QvasiModo,
;
;
.MODEL SMALL
.386
.stack 200h
STOP equ int 3
.data?; can contain ONLY un-initialized data, keeps executable small
random db 64000 dup(?)
file_name db 128 dup(?); DOS maximum path length
storage db 150 dup(?)
.data
handle dw ?
file_size dd ?
name_size dw ?
; Direct video writes, shows right after Version number !!
;
prompt db 13,10,13,10,9,'File Shredder Ver. 1h' ,13,10
db 13,10,9,'� Copyright 1996 - 2004',13,10
db 13,10,9,'IF YOU USE THIS PROGRAM, OVERWRITTEN FILES',13,10
db 13,10,9,'WILL BE GONE FOR GOOD. THIS PROGRAM CAUSES',13,10
db 13,10,9,'PERMANENT DATA LOSS. YOU HAVE BEEN WARNED!!',13,10
db 13,10,9,'Use SHORT (8.3) FILENAME when file is a LFN.',13,10
db 13,10,9,'Use full path when not in current DIR/DRIVE',13,10
db 13,10,9,'Usage: C:\PROGRA~1\FILENAME.ASM',13,10,13,10
db 13,10,9,'File name to SHRED --> $'
not_there db 13,10,13,10,13,9,'File not present.',13,10,'$'
emsg2 db 13,10,13,10,'Error moving file pointer.',13,10,'$'
emsg3 db 13,10,13,10,'Error writing to file.',13,10,'$'
done_msg db 13,10,13,10,'File has been shredded.',13,10,'$'
eraser_name db '��������.',0
.code
start:
mov ah,15; clear the screen
int 10h
mov ah,0
int 10h
mov ax,@data
mov ds,ax
mov es,ax; need for LFN functions
mov bx,00h; write zeros into memory
zero_out:; Set memory to zero
mov [random + bx],00h
inc bx
cmp bx,64000
jnz zero_out
mov dx, offset prompt
mov ah,9
int 21h
mov file_name,128; max characters in input
mov dx,offset file_name; get filename
mov ah,0ch; flush keyboard buffer
mov al,0ah; buffered keyboard input
int 21h
mov cl,[file_name + 1]; how many bytes read in
add cl,2; find position after last character
mov ch,00
mov si,cx; move count to index register
mov [name_size],cx; save size
mov file_name[si],00; make into ASCII string
; Change any read-only attribute
change:
lea dx,file_name + 2
mov ax,4301h
mov bl,01h; set attributes
;Bitfields for file attributes: (CX register)
;Bit(s) Description (Table 01420)
; 7 shareable (Novell NetWare)
; 7 pending deleted files (Novell DOS, OpenDOS)
; 6 unused
; 5 archive
; 4 directory
; 3 volume label
; execute-only (Novell NetWare)
; 2 system
; 1 hidden
; 0 read-only
mov cx,00000000b; remove read-only attribute
int 21h
;INT 21 - Windows95 - LONG FILENAME - CREATE OR OPEN FILE
; AX = 716Ch
; BX = access mode and sharing flags (see #01782,also AX=6C00h);
; CX = attributes
; DX = action (see #01781)
; DS:SI -> ASCIZ filename
open_it:
mov ax,716Ch; create file
xor cx,cx; file attributes
; file access modes (bits) BX register
; 000 read-only
; 001 write-only
; 010 read-write
; 100 read-only, do not modify file's last-access time
; Bitfields for Windows95 long-name open action: DX Register
; Bit(s) Description (Table 01781)
; 0 open file (fail if file does not exist)
; 1 truncate file if it already exists (fail if file does not exist)
; 4 create new file if file does not already exist (fail if exists)
; Note: the only valid combinations of multiple flags are bits 4&0 and 4&1
mov bx,00000001b; access mode - write only
mov dx,00000001b; open file
lea si,file_name + 2; sets the file name
int 21h
mov [handle],ax; Save file handle
jnc short get_size; No errors, go on
no_file:
mov dx,offset not_there; Get error message
jmp error; and go display/exit
get_size:
mov ax,4202h; Set file pointer
mov bx,[handle]; for this file
xor cx,cx; relative to end of file
xor dx,dx; offset 0 bytes
int 21h
jnc save_size
err2:
mov dx,offset emsg2; Get error message
jmp error; and go display/exit
save_size:
mov word ptr [file_size],ax; Save low word of file size
mov word ptr [file_size + 2],dx; Save high word
mov ax,4200h; Move file pointer
mov bx,[handle]; for this file
xor cx,cx; relative to beginning of file
xor dx,dx; offset 0 bytes
int 21h
jc err2; Errors: go handle
next_bunch:
mov cx,64000; Assume 64,000 bytes or more
; left to do
sub word ptr [file_size],cx; Is there ? - subtract it
sbb word ptr [file_size + 2],0; from saved file size
jae wipe; There were 64,000 bytes or
; more left
mov cx,word ptr [file_size]; Get number of bytes left
add cx,64000; back CX (undo subtraction)
wipe:
mov ah,40h; Write file
mov bx,[handle]; Handle
lea dx,random; Write the random bytes
int 21h
jnc check_size; No errors, go on
err3:
mov dx,offset emsg3; Get appropriate error message
jmp error; and go display/exit
check_size:
cmp ax,cx
jnz err3
cmp ax,64000; Full 64,000 bytes written,
je next_bunch; yes, go check for more
jmp SHORT $+2; short delay cuz sometimes
; file isn't renamed
;
mov bx,[handle]; close file
mov ah,3eh
int 21h
trunc:
; Truncate file to zero bytes
mov ah,3ch; truncate file to zero bytes
mov cx,0
mov dx,offset file_name + 2
int 21h
mov bx,[handle]; close file
mov ah,3eh
int 21h
; Store the path
scan:
lea si,[file_name + 2]
xor cx,cx
mov di,si
mov cx,[name_size]
mov al,'\'
add di,cx
std; scan from right to left
dec di
repne scasb
jnz short no_path; No slash is present
add cx,1;
no_path:
mov di,offset storage
cld; change directions and scan
rep movsb; from left to right
mov al,00
stosb; make path ASCIZ
;STOP
; Add on eraser_name to end of storage
add_eraser:
mov cx,[name_size]
mov si,cx
lea di,storage
mov al,00; stops at the byte after the "00"
repnz scasb
dec di; backup one
xor cx,cx
mov si,offset eraser_name
mov cx,9; # of characters
rep movsb
; Rename and delete file (LFN)
rename:
mov dx,offset file_name + 2; old file name
mov di,offset storage
mov ax,7156h; LFN support
int 21h
; Change file date and time
mov ax,716Ch; open file
xor cx,cx; file attributes
; file access modes (bits) FOR BX Register
; 000 read-only
; 001 write-only
; 010 read-write
; 100 read-only, do not modify file's last-access time
; set bit 14 - commit file after every write operation
mov bx,00000000000000010b; access mode (R/W)
mov dx,1; open file
lea si,storage; sets the file name
int 21h
mov bx,ax; save file handle
push bx
mov ax,5701h; change file date
; BITS 5-10 are minutes, 11-15 are hours
mov cx,677dh; 12:59:58 pm 110011101111101b
;
; BITS 0-4 are day, 5-8 are month, 9-15 (year - 1980)
mov dx,021h; 1/1/80 0000000000100001b
int 21h
pop bx
;INT 21 U - DOS 4.0+ - COMMIT FILE
; AH = 6Ah
; BX = file handle
mov ah,6ah; make sure this file is written to disk
int 21h
mov ah,3eh; close file
int 21h
; INT 21 - Windows95 - LONG FILENAME - DELETE FILE
; AX = 7141h
; DS:DX -> ASCIZ long name of file to delete
mov dx,offset storage; delete file
mov ax,7141h
xor si,si
int 21h
; idea from Fauzan Mirza
xor ax,ax; Zero out file_name
mov di,offset storage + 2
mov cx,150
repnz stosb
finito:
mov ah,9
mov dx,offset done_msg
int 21h
mov ax,4c00h; Set errorlevel to 0
int 21h
error:
mov ah,9
int 21h
mov ax,4c01h; Set errorlevel to 1
int 21h
end start
Click here to Reply
Robert Wessel
1/23/13
On Tue, 22 Jan 2013 05:56:40 -0800 (PST), Andy
<[email protected]> wrote:
>This works for the most part in Win 7 Pro SP 1 using Run, cmd.exe.
>
>I would like to fix the file renaming function if it's possible.
>
>Thanks.
>
>
Code: [Select]
Some advice given at a newsgroup.
Why wouldn't you just do a 32 bit version of this? That way it'll
also run on 64 bit versions of Windows.
Terje Mathisen
1/23/13
Andy wrote:
> zero_out:; Set memory to zero
> mov [random + bx],00h
> inc bx
> cmp bx,64000
> jnz zero_out
Andy, how much x86 asm have you written?
Using a loop like this to initialize memory seems like a rather glaring
omission of the instructions Intel designed for such tasks;
;; Assuming ES == DS, and CLD has been done
mov di,offset [random]
mov cx,64000 / 2
mov ax,0
rep stosw
When you overwrite a file, you should probably round up the length to
the next full allocation cluster size (often 4KB, but check!), so that
you get rid of any data remaining in that tail.
Otherwise I agree with Robert, such a program should probably be written
in C or (my personal favourite for snippets like this: Perl!)
Terje
|
|
Close Topic Options